[Development] Bugs and Feature requests

Steven Leeman steven at leeman.be
Wed Nov 12 07:20:20 UTC 2008


* size shown in usb disc support is still not in bytes/kbytes...hence my
200gbyte disk (externally fed with power offcoze :) is shown with size
586099332
* Register button is stilled showing although the device is allready
registered ('register when necessary"? :-)... exists also on fon+
* Fonera Status "content goes here" :-)
* Configuration summary : DNS N/A ??? but i'm able to surf the internet via
LAN...
Firmware Version: *2.1.0.2* Internet connection

   - Connection type: dhcp
   - IP Address: 192.168.1.70
   - Gateway address: 255.255.255.0
   - DNS Server: N/A

* speed from USB harddisk (7200rpm) to lan/myplace : 500kbyte/s

* Connected a HUWAEI E220 to the device... still a red cross on it; but I
can enter my credentials
it will then dial in
Internet connection

   - Connection type: umts
   - IP Address: N/A
   - Gateway address: N/A
   - DNS Server: N/A

i can now only visit 192.168.10.1 other sites are redirected to
192.168.10.1with a 404 not found (within expectations)
okay seems a username&password error ...it only asks apn & username&password
: not the pin field anymore (!!)
googled up "mobistar" als user & pasword
now it says i have no umts modem connected...strange...it's green led is
active & fon2 has it's power led orange)
reconnecting umts modem does not work (it's on an active powered usb2
hub!!!)

suddenly the fon2 has no orange power led anymore
it has changed back to "wan internet" so it seems...nice! it failovered!
(good!)
surfing is back possible

connecting new usb equipment seems now impossible...printer is not
recognized... will perform reboot...
this is what dmesg says (no mentioning of printer..) dmesg is not giving any
more logging even when disconnecting & connecting the usb hub!

usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usb 1-1.4: USB disconnect, address 6
usb 1-1.4: new full speed USB device using ehci_hcd and address 7
usb 1-1.4: configuration #1 chosen from 1 choice
usb-storage: probe of 1-1.4:1.0 failed with error -5
option 1-1.4:1.0: GSM modem (1-port) converter detected
usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
usb-storage: probe of 1-1.4:1.1 failed with error -5
option 1-1.4:1.1: GSM modem (1-port) converter detected
usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi 5:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
usb-storage: device scan complete
EXT3-fs: Unrecognized mount option "uid=1000" or missing value
EXT2-fs warning (device sdb1): ext2_fill_super: mounting ext3 filesystem as
ext2
usb 1-1.2: USB disconnect, address 4
usb 1-1.2: new full speed USB device using ehci_hcd and address 8
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.4: USB disconnect, address 7
option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
option 1-1.4:1.0: device disconnected
option 1-1.4:1.1: device disconnected
option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
usb 1-1.4: new full speed USB device using ehci_hcd and address 9
usb 1-1.4: configuration #1 chosen from 1 choice
usb-storage: probe of 1-1.4:1.0 failed with error -5
option 1-1.4:1.0: GSM modem (1-port) converter detected
usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
usb-storage: probe of 1-1.4:1.1 failed with error -5
option 1-1.4:1.1: GSM modem (1-port) converter detected
usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 9
usb-storage: waiting for device to settle before scanning
usb 1-1.4: reset full speed USB device using ehci_hcd and address 9
usb 1-1.4: device descriptor read/64, error -145
usb 1-1.4: device descriptor read/64, error -145
usb 1-1.4: reset full speed USB device using ehci_hcd and address 9
usb 1-1.4: device descriptor read/64, error -145
usb 1-1.4: device descriptor read/64, error -145
usb 1-1.4: reset full speed USB device using ehci_hcd and address 9
usb 1-1.4: device not accepting address 9, error -145
usb 1-1.4: reset full speed USB device using ehci_hcd and address 9
usb 1-1.4: device not accepting address 9, error -145
scsi 8:0:0:0: Device offlined - not ready after error recovery
usb 1-1.4: USB disconnect, address 9
option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
option 1-1.4:1.0: device disconnected
option 1-1.4:1.1: device disconnected
CPU 0 Unable to handle kernel paging request at virtual address 00000004,
epc == c03bc604, ra == c019eb00
Oops[#1]:
Cpu 0
$ 0   : 00000000 1000bc00 00000000 80f6ac00
$ 4   : 80f6a400 80f6a000 ffffffff 1000bc01
$ 8   : 0000000a 00000000 00000000 80cb2000
$12   : 00000286 22e50e56 802af988 81d355ec
$16   : 80f6a2f4 80f6a400 80fd6618 80fd6600
$20   : 00000000 80fd6600 00000000 80f6a000
$24   : 80ed9ba0 000186a0
$28   : 80ed8000 80ed9d80 00000000 c019eb00
Hi    : 000028ed
Lo    : b50eb480
epc   : c03bc604 usb_stor_report_device_reset+0xc4/0x560 [usb_storage]
Tainted: P
ra    : c019eb00 scsi_free_host_dev+0x6fc/0x778 [scsi_mod]
Status: 1000bc03    KERNEL EXL IE
Cause : 30800008
BadVA : 00000004
PrId  : 00019064 (MIPS 4KEc)
Modules linked in: sch_red sch_sfq sch_hfsc cls_fw imq uvcvideo fuse sierra
option videodev compat_ioctl32 v4l1_compat v4l2_common usb_storage usbserial
usblp snd_usb_audio snd_usb_lib evdev ehci_hcd ath_ahb wlan_xauth wlan_wep
wlan_tkip wlan_ccmp wlan_acl ath_rate_minstrel ath_hal(P) wlan_scan_sta
wlan_scan_ap wlan input_core sd_mod nf_conntrack_ftp ipt_REDIRECT ipt_NETMAP
ipt_TTL xt_MARK ipt_ECN xt_CLASSIFY ipt_ttl xt_time ipt_time xt_tcpmss
xt_statistic xt_mark xt_mac xt_length ipt_ecn xt_DSCP xt_dscp ipt_IMQ
xt_string xt_layer7 ipt_ipp2p ipt_LOG xt_CHAOS xt_DELUDE xt_TARPIT xt_quota
xt_portscan xt_pkttype iptable_raw xt_NOTRACK xt_CONNMARK ipt_recent
xt_helper xt_conntrack xt_connmark xt_connbytes tun snd_pcm_oss
snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep
snd_page_alloc snd soundcore ppp_async ppp_generic slhc crc_ccitt vfat fat
ext3 jbd ext2 nls_utf8 nls_iso8859_1 nls_cp437 usbcore scsi_mod nls_base
Process usb-stor-scan (pid: 8543, threadinfo=80ed8000, task=80f4ab70,
tls=00000000)
Stack : 80f6a400 80f6a000 80fd6618 80fd6600 80f6a400 80f6a000 c019eb00
c019ea88
        80fd6680 8013ad2c 00000001 00000003 00000000 ffffffff 80f6a0d8
00000000
        80f6a0d8 00000000 00000000 c019ee3c 80f6a004 8016a2d8 80fd6600
80fd6604
        80fd6618 80f6a000 c019e878 c019e638 8013af5c 8013af5c 00000008
00000000
        00000003 81750818 80fd66a4 8013aedc 80f6a0d8 00000003 80f6a0d8
ffffffff
        ...
Call Trace:
[<c03bc604>] usb_stor_report_device_reset+0xc4/0x560 [usb_storage]
[<c019eb00>] scsi_free_host_dev+0x6fc/0x778 [scsi_mod]


Code: 00431021  8c420184  00808821 <94450004> 8c840004  00051202  00052a00
00a22825  30a5ffff
option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
<end of all logging>




On Tue, Nov 11, 2008 at 8:09 PM, Robin Harmsen <robin at rharmsen.nl> wrote:

>  Ok, here we go as the trac isn't ready yet, all with Beta2 firmware:
>
> - The admin user now needs to login with username root on the webif.
> - The password can't be changed (webif also says that the username is
> 'admin' there)
> - Changing internet settings to WiFi doesn't work (no connection after
> commit or reboot)
> - There is no reboot button in the webif
> - On services page, the FTP logo is the same as DynDNS
>
> Greetings,
>
> Robin Harmsen
>
> _______________________________________________
> Development mailing list
> Development at fonosfera.org
> http://fonosfera.org/mailman/listinfo/development
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://fonosfera.org/pipermail/development/attachments/20081112/98cf4255/attachment.htm 


More information about the Development mailing list